surface mounting of NEO / SATURN wallplates

[coppo1]

Due to the sticky-outty bits on the back of a NEO or SATURN wallplate that
prevent it sitting flush on a 238 ( clipsal surface mount wall box ) or similar,
a flush mounting kit has been made

NEO 5050SD, XX ( xx = your colour )
SATURN 5080SD, XX ( xx = your colour )

[charlie crackle]

Got a picture...

are they just like the 238 with cut outs for the sticky out bits

I assume only for the rectangle NEO not square

[coppo1]

Got a picture...

Heres a few piccies Mr Crackle.


The NEO is a 2 part affair, with the actual switch sanwiched into it.

The SATURN a 1 piece , switch sits straight on top of it.

[Michael]

Its important to note that the Saturn mounting block has a specific mounting direction. You'll notice that the block has 2 holes, these are so you can access the release clips of the facia. If you accidentally put it on the wrong way....... the facia becomes a real headache cause it doesnt come off!!