Re: Pronto codes for Foxtel Digital Cable

[mfergusson]

Hi,

I'm also looking for Foxtel Pronto hex codes - specifically the up and
down arrow keys?

David, do you perhaps have these and can you please send to me?

Thanks,

Mark


--
mfergusson

[Michael]

It depends which STB you have. It'll be here though:
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=pronto&db=devices&br=&fc=

"mfergusson" <mfergusson.28kkv1@no-mx.phorums.com.au> wrote in message
news:mfergusson.28kkv1@no-mx.phorums.com.au...
>
> Hi,
>
> I'm also looking for Foxtel Pronto hex codes - specifically the up and
> down arrow keys?
>
> David, do you perhaps have these and can you please send to me?
>
> Thanks,
>
> Mark

[mfergusson]

My guide says DSN 700 Series. Thanks for the link but not listed here.
Not sure if equivalent to any of these. How do I get the hex codes from
the CCF files?

Thanks,

Mark

BTW, the Foxtel DSS receivers are listed here:

http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=pronto&db=devices&br=foxtel&dv=dssreceiver


--
mfergusson

[ReelMan]

UP
0000 0072 0000 0012 000E 000A 0005 000A 0005 0017 0005 000A 0005 0010 0005
0017 0005 0017 0005 000A 0005 000A 0005 000A 0005 0017 0005 0010 0005 0017
0005 0010 0005 0010 0005 0017 0005 000A 0005 0CCD

DOWN
0000 0072 0000 0012 000E 000A 0005 000A 0005 0017 0005 000A 0005 0010 0005
0017 0005 0017 0005 000A 0005 000A 0005 000A 0005 0017 0005 0010 0005 0017
0005 0010 0005 0010 0005 0017 0005 0010 0005 0CCD

I have alot of problems with foxtel up and down buttons. You have probably
noticed that it continually scrolls on the screen when up or down is
pressed.

I usually have to learn new codes again for foxtel with all my installations
as the light in the room does seem to affect it a fair bit.
Sometimes what does help is putting a delay after the 'problem code' in the
buttons properties.

I have a few more foxtel hex codes so let me know if you need more to try :)

VPro

"mfergusson" <mfergusson.28kkv1@no-mx.phorums.com.au> wrote in message
news:mfergusson.28kkv1@no-mx.phorums.com.au...
>
> Hi,
>
> I'm also looking for Foxtel Pronto hex codes - specifically the up and
> down arrow keys?
>
> David, do you perhaps have these and can you please send to me?
>
> Thanks,
>
> Mark
>
>
> --
> mfergusson

[ReelMan]

Also if you need to read .ccf files I can send u ProntoEdit

VPro

"ReelMan" <beaul83@optusnet.com.au> wrote in message
news:447bc310$0$25129$afc38c87@news.optusnet.com.a u...
> UP
> 0000 0072 0000 0012 000E 000A 0005 000A 0005 0017 0005 000A 0005 0010 0005
> 0017 0005 0017 0005 000A 0005 000A 0005 000A 0005 0017 0005 0010 0005 0017
> 0005 0010 0005 0010 0005 0017 0005 000A 0005 0CCD
>
> DOWN
> 0000 0072 0000 0012 000E 000A 0005 000A 0005 0017 0005 000A 0005 0010 0005
> 0017 0005 0017 0005 000A 0005 000A 0005 000A 0005 0017 0005 0010 0005 0017
> 0005 0010 0005 0010 0005 0017 0005 0010 0005 0CCD
>
> I have alot of problems with foxtel up and down buttons. You have probably
> noticed that it continually scrolls on the screen when up or down is
> pressed.
>
> I usually have to learn new codes again for foxtel with all my
> installations as the light in the room does seem to affect it a fair bit.
> Sometimes what does help is putting a delay after the 'problem code' in
> the buttons properties.
>
> I have a few more foxtel hex codes so let me know if you need more to try
> :)
>
> VPro
>
> "mfergusson" <mfergusson.28kkv1@no-mx.phorums.com.au> wrote in message
> news:mfergusson.28kkv1@no-mx.phorums.com.au...
>>
>> Hi,
>>
>> I'm also looking for Foxtel Pronto hex codes - specifically the up and
>> down arrow keys?
>>
>> David, do you perhaps have these and can you please send to me?
>>
>> Thanks,
>>
>> Mark
>>
>>
>> --
>> mfergusson
>
>

[Michael]

Yeah, I didn't send you that link in case you had a Pace STB, which aren't
there.

There's 3 different 7xx profiles(which I presume are part of the 700 series,
starting with 700 and all ;)) to try on that page you linked. Google
'prontoedit' or 'tonto' to download and read the .ccf files.

"mfergusson" <mfergusson.28lkym@no-mx.phorums.com.au> wrote in message
news:mfergusson.28lkym@no-mx.phorums.com.au...
>
> My guide says DSN 700 Series. Thanks for the link but not listed here.
> Not sure if equivalent to any of these. How do I get the hex codes from
> the CCF files?
>
> Thanks,
>
> Mark
>
> BTW, the Foxtel DSS receivers are listed here:
>
> http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=pronto&db=devices&br=foxtel&dv=dssreceiver
>
>
> --
> mfergusson

[mfergusson]

Hi. Many thanks for this/replies. This is hopefully going to save the
day!

Can you send me prontoedit, or where's the best place to download from
so I can extract the hex codes out of CCF files? (prontoedit.com but
seems I need to register, and not sure there's more to it than that)

Thanks.


--
mfergusson

[ReelMan]

What email would u like me to send it to?

"mfergusson" <mfergusson.28lv4z@no-mx.phorums.com.au> wrote in message
news:mfergusson.28lv4z@no-mx.phorums.com.au...
>
> Hi. Many thanks for this/replies. This is hopefully going to save the
> day!
>
> Can you send me prontoedit, or where's the best place to download from
> so I can extract the hex codes out of CCF files? (prontoedit.com but
> seems I need to register, and not sure there's more to it than that)
>
> Thanks.
>
>
> --
> mfergusson

[mfergusson]

send to nospam@islandbazaar.com

Thanks.


--
mfergusson

[mfergusson]

The codes ReelMan gave me for up and down give the same problem I have -
the up arrow and down arrow is duplicated - it always moves up or down 2
lines - most enoying. All other keys work fine.

Any suggestions?

I'm going to try extract other codes from some of the other CCF files
but don't have a good feeling about this ...

BTW, I'm actually using a pc based remote called IRTrans to record and
then re-transmit remote commands (including these hex commands). Great
product if anyone wants details.

Thanks,

Mark


--
mfergusson

[ReelMan]

The pc based remote could be part of the problem too. Alot of installers
have been having trouble with the new foxtel boxes when using learning
remotes and IR repeater systems. I had glitches 90% of the time when using
marantz 5200 or 5400 along with a xantech or similar IR system but never had
a problem when using the Nevo remote whether it be via the same IR system or
via its own RF system.

aVPro

"mfergusson" <mfergusson.28n0ep@no-mx.phorums.com.au> wrote in message
news:mfergusson.28n0ep@no-mx.phorums.com.au...
>
> The codes ReelMan gave me for up and down give the same problem I have -
> the up arrow and down arrow is duplicated - it always moves up or down 2
> lines - most enoying. All other keys work fine.
>
> Any suggestions?
>
> I'm going to try extract other codes from some of the other CCF files
> but don't have a good feeling about this ...
>
> BTW, I'm actually using a pc based remote called IRTrans to record and
> then re-transmit remote commands (including these hex commands). Great
> product if anyone wants details.
>
> Thanks,
>
> Mark
>
>
> --
> mfergusson

[Michael]

Tonto is better than prontoedit, particularly with regard to hex codes with
features like 'cleanup' which might solve your repeating problem. Just
search for 'tonto pronto'. Chances are 1 of those 3 .ccfs will have it done
properly anyway.

"mfergusson" <mfergusson.28n0ep@no-mx.phorums.com.au> wrote in message
news:mfergusson.28n0ep@no-mx.phorums.com.au...
>
> The codes ReelMan gave me for up and down give the same problem I have -
> the up arrow and down arrow is duplicated - it always moves up or down 2
> lines - most enoying. All other keys work fine.
>
> Any suggestions?