A couple of projects

[Forumadmin]

Thought I'd through in couple of project pics of some switch board installs we have done.
Sorry about the quailty of the pics but you get the idea.

[Forumadmin]

And another

[Forumadmin]

And a small minder install

[Forumadmin]

And another with minder, cbus, starserver video and a homesafe.

Not great pictures i know but you get the idea. I'll vist some sites in the next week or so and get a few more if anyones interested.

Cheers

[Forumadmin]

Found another one, its just a pool equipment room of one end of the residence. Controlling all the pool gear.

[znelbok]

the install in the first pic is a hell of a lot neater than what I have. The clipsal switchboard I used does not seem to offer a lot of space between the din rails and everything gets a little cluttered.

What board did you use? and where is the neutral bar? (or where are they terminated)

mick

[Forumadmin]

Its a Clipsal 4C48FD. Plenty of room and the basis for what I wanted designed as the C-bus switchboard range, but as i said before, thats another story.

Its a highly recommend board for your next install (AND CHEAP for a 48 pole metal board). I use them by the truck load and with a few simple mods would make a great C-Bus speciallised board. All the pics are 4C48FD's except for the pool room one.

The neutrals are bunched and lay horizontal (slightly obscured) with the relay or dimmer. They come with a split neutral bar on the left hand side. We usually remove the neutral bar as in most cases they are of little use. My design for the specilised board has 5 nuetral bars in it.

Hope it gives some of you a few tips.

Cheers.