John Evans
18-12-2005, 08:11 AM
I have worked on these systems before. The switching comes from a
signal at the "zero crossing " of the 60hz power. Anything that puts
noise on the line may interfere with the signal. They make filters to
suck out harmonics, and do a fairly good job of it.
John Evans
On Tue, 25 Oct 2005 12:52:46 -0200, "Flavio Silva"
<flavio_ernesto143@hotmail.com> wrote:
>**** Post for FREE via your newsreader at post.usenet.com ****
>
>Guys,
>
>My X10 system works fine up to I install a fluorescent light. It makes the
>other lights don't respond to remote commands.
>
>What should I do, pls?
>
>Thanks for any info!
>
>Flavio
>
>
>
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> *** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
> http://www.usenet.com
>Unlimited Download - 19 Seperate Servers - 90,000 groups - Uncensored
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
signal at the "zero crossing " of the 60hz power. Anything that puts
noise on the line may interfere with the signal. They make filters to
suck out harmonics, and do a fairly good job of it.
John Evans
On Tue, 25 Oct 2005 12:52:46 -0200, "Flavio Silva"
<flavio_ernesto143@hotmail.com> wrote:
>**** Post for FREE via your newsreader at post.usenet.com ****
>
>Guys,
>
>My X10 system works fine up to I install a fluorescent light. It makes the
>other lights don't respond to remote commands.
>
>What should I do, pls?
>
>Thanks for any info!
>
>Flavio
>
>
>
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> *** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
> http://www.usenet.com
>Unlimited Download - 19 Seperate Servers - 90,000 groups - Uncensored
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=