Badger
24-01-2005, 09:41 PM
Have you tried Cleaning it with alcohol? I had one that did something
similar and all it needed was a good cleaning. Incidentally cleaning
it with Fantastic and Windex made it worse.
Clay
"Dan" <QuadzilaNOSPAM@optonline.net> wrote in message
news:0vrit0p5q095phj9k4dv3jnljolk8ih7pf@4ax.com...
> Hi All,
> Was hoping someone can help me w/a problem I'm having w/a screw-in
> type touch lamp/dimmer. The lamp I'm trying to use is a metal wall
> mounted swing arm lamp. The lamp has a sticker that says only 3 way
> bulbs of less than 150 watts should be used and that's the type of
> bulb I'm using. Dimang makes the screw in touch lamp dimmer.
> The lamp was working fine until some moved it to move a bed. After
> that, it didn't work at all. Tried loosening the bulb a bit which
> helped but if I touched the lamp too hard the lamp would go from off
> to dim to bright them off very rapidly repeatedly. I'm a
quadriplegic
> and this device is a great help when it works. Any suggestions on
how
> to fix this are greatly appreciated!
>
> Dan
> Quadzila@NOSPAMoptonline.net
> Remove NOSPAM from address when replying
>
>
>
similar and all it needed was a good cleaning. Incidentally cleaning
it with Fantastic and Windex made it worse.
Clay
"Dan" <QuadzilaNOSPAM@optonline.net> wrote in message
news:0vrit0p5q095phj9k4dv3jnljolk8ih7pf@4ax.com...
> Hi All,
> Was hoping someone can help me w/a problem I'm having w/a screw-in
> type touch lamp/dimmer. The lamp I'm trying to use is a metal wall
> mounted swing arm lamp. The lamp has a sticker that says only 3 way
> bulbs of less than 150 watts should be used and that's the type of
> bulb I'm using. Dimang makes the screw in touch lamp dimmer.
> The lamp was working fine until some moved it to move a bed. After
> that, it didn't work at all. Tried loosening the bulb a bit which
> helped but if I touched the lamp too hard the lamp would go from off
> to dim to bright them off very rapidly repeatedly. I'm a
quadriplegic
> and this device is a great help when it works. Any suggestions on
how
> to fix this are greatly appreciated!
>
> Dan
> Quadzila@NOSPAMoptonline.net
> Remove NOSPAM from address when replying
>
>
>